Antenna Faulty

The error Antenna Faulty is shown on the front panel display or in the LANTIME Web Interface.

In the LANTIME Web Interface, this would be shown in the Alarm section on the Main page of the Web Interface, as shown by the screenshot below:

For troubleshooting it is important to know which type of clock module is installed in the LANTIME. The article LANTIME Determine the Type of the Clock Module describes how to determine the type.

The general article Antenna Faulty describes possible causes and troubleshooting steps for the different type of clock modules.

If further assistance is required, contact Meinberg Technical Support: https://www.meinbergglobal.com/english/support/tech-support.htm

— Manuel Schäfer manuel.schäfer@meinberg.de, last updated 2023-05-16