MRS Source No Signal

The warning MRS Source No Signal is shown in the LANTIME Web Interface:

The MRS Source No Signal warning is displayed whenever a time source is prioritized (under Clock –> MRS Settings) for which there is no signal available.

In the example below, the device has GPS, NTP, PTP, SyncE and PPS+String as reference time sources configured in the MRS Settings menu:

But there is only a signal available for GPS. This is shown on the Clock page –> MRS State tab:

Only configure time sources for which you expect to have an input signal and set all the other to Unconfigured; for example:

If further assistance is required, contact Meinberg Technical Support: https://www.meinbergglobal.com/english/support/tech-support.htm

— Manuel Schäfer manuel.schaefer@meinberg.de, last updated 2023-05-16