Modules

Here is a list of all modules:

[detail level 12]

Device read functions
Legacy COM_PARM conversion functions
Status of buffered (non-volatile) data
Extended feature definitions
Synthesizer parameters
Time zone / daylight saving parameters
IRIG time codes
IRIG input delay compensation
Time Scale Configuration
Programmable Output API
▼Support for multiple reference time sources
Common multi ref definitions
Definitions used with the old multi ref API
Extended multi ref definitions
GPIO port configuration stuff
HaveQuick definitions
Event logging support
IMS support
Generic I/O support.
Definitions used with SCU devices
▼GNSS Satellite Status
GNSS status flags encoding
▼Network configuration stuff
Basic network parameter types
Definitions used with VLAN configuration
Simple IPv4-only configuration or status
Types used for extended network configuration and status
Extended network configuration and status
User Captures via Network
▼Definitions used with PTP/IEEE1588
Bit masks used with PTP_CFG_INFO::supp_flags and PTP_CFG_SETTINGS::flags
Bit masks used with PTP_CFG_INFO::supp_flags_ex and PTP_CFG_SETTINGS::flags_ex
Definitions used with NTP
Definitions used with LNO devices
Definitions used with Versatile Storage
Definitions used with SHS devices
eXtended Binary Protocol definitions
▼Meinberg TLV API definitions
Meinberg TLV feature definitions
Definitions used with navigational data received from GPS satellites
Meinberg LED API definitions
Definitions specific to LNE devices
Definitions for power control API
Extended system information
License information
Clock resolution info
IO Port API
▼Monitoring / notification
Monitoring Event Info Indexes
Tainted config
User Management
Service Management
Firmware Management
Database(s)
Basic macros used to implemment IOCTL functions
Extended macros used to implemment IOCTL functions
API functions that can be used to open a device
API functions reading high resolution time, plus status
Fast API functions reading high resolution timestamps, but no status
Legacy API functions to read the time
Extrapolation of high resolution time stamps
IOCTL codes used by Meinberg drivers
▼NTP interface definitions
NTP Leap Bits
Reference type names
Definitions used with the status port
Definitions used with PZF receivers
BUS flag masks
Feature flags used with PCPS_FEATURES
IRQ status information
Low level functions used to access the hardware device
▼Groups of functions used to check if a particular feature is supported
mbgdevio functions used to check if a particular feature is supported
Deprecated mbgdevio functions to check if a particular feature is supported
mbgextio functions used to check if a particular feature is supported
Low level functions used to check if a particular feature is supported