| C_DEVICE_INFO | |
| C_MBG_DEV_FN_LIST_ENTRY | The structure behind the MBG_DEV_FN_LIST_ENTRY type |
| C_MBG_DEV_NAME_LIST_ENTRY | The structure behind the MBG_DEV_NAME_LIST_ENTRY type |
| C_MBG_STR_LIST | |
| CALL_DATABASE_INFO | |
| CALL_EVENTS | |
| CALL_FIRMWARE_INFO | |
| CALL_GNSS_INFO | Summary information on all supported GNSS systems |
| CALL_GPIO_INFO | |
| CALL_GPIO_STATE | |
| CALL_IMS_INFO | |
| CALL_IMS_STATE | |
| CALL_MBG_IO_PORTS | |
| CALL_MONITORING_INFO | All monitoring information |
| CALL_NET_CFG_INFO | All network configuration parameters |
| CALL_NTP_CFG_INFO | |
| CALL_NTP_STATUS | |
| CALL_PTP_CFG_INFO | All PTP configuration parameters |
| CALL_PTP_V1_COMMON_DATASETS | All PTPv1 common datasets for a PTP device |
| CALL_PTP_V2_COMMON_DATASETS | All PTPv2 common datasets for a PTP device |
| CALL_SERVICE_INFO | |
| CALL_SNMP_INFO | All SNMP configuration information |
| CALL_SYSLOG_INFO | |
| CALL_UCAP_INFO | |
| CALL_UCAP_NET_INFO | |
| CALL_USER_INFO | |
| CALL_XBP_INFO | All XBP information of a XBP supporting device |
| CALL_XMULTI_REF_INFO | |
| CALL_XMULTI_REF_STATUS | |
| CALM | Almanac parameters of one specific satellite |
| CANT_INFO | Antenna status and error at reconnect information |
| CASCII_MSG | GPS ASCII message |
| CBUILTIN_FEATURE_TABLE_ENTRY | Entry for a table to specify model-depending built-in features |
| CCAL_REC_HDR | Structure used to retrieve the number of records for a given type |
| CCAL_REC_IRIG_RX_COMP | Structure used to transfer calibration records |
| CCFGH | Summary of configuration and health data of all satellites |
| CCLSTR_STATUS | |
| CCOM_PARM | A structure to store the configuration of a serial port |
| CCORR_INFO | PZF correlation status info |
| CCRYPT_MSG_PREFIX | A message prefix used for encrypted messages |
| CCTRY | |
| CCYCLES_FILTER_DATA | A structure to keep filter data for cycles values |
| CDMS | Geographic longitude or latitude in [degrees, minutes, seconds] |
| CEF_INFO | |
| CELLIPSOID | Characteristics of a geographic reference ellipsoid |
| CENABLE_FLAGS | A structure controlling when output signals are enabled |
| CEPH | Ephemeris parameters of one specific satellite |
| CERRNO_CNV_ENTRY | |
| CFIXED_FREQ_INFO | A structure used to hold a fixed frequency value |
| CFPGA_INFO | |
| CFPGA_START_INFO | |
| CGEN_IO_INFO | The data structure used with the PCPS_GEN_IO_GET_INFO command |
| CGNSS_SAT_INFO | Satellite information for a particular GNSS type |
| CGNSS_SAT_INFO_IDX | One of several sets of satellite information for a particular GNSS type |
| CGNSS_SV_STATUS | Detailed GNSS satellite status |
| CGNSS_SV_STATUS_IDX | Detailed GNSS satellite status, plus index |
| CHAVEQUICK_INFO | Current settings and capabilities of a HaveQuick input or output |
| CHAVEQUICK_SETTINGS | Configuration settings for a HaveQuick input or output |
| CIDENT | |
| CINDENTS | |
| CIOCTL_BUFFER | |
| CIOCTL_DEV_FEAT_REQ | Request buffer used to query a device feature |
| CIOCTL_GENERIC_REQ | A structure used to pass generic IOCTL requests to the kernel driver |
| CIONO | Ionospheric correction parameters |
| CIP4_INFO | |
| CIP4_SETTINGS | Settings of an IPv4-only network interface |
| CIP6_ADDR | An IPv6 address |
| CIP6_ADDR_CIDR | An IPv6 address plus number of netmask bits |
| CIRIG_INFO | Current IRIG settings and supported codes |
| CIRIG_RX_COMP | A structure used to store compensation values |
| CIRIG_SETTINGS | Configuration settings of an IRIG input or output |
| CLAN_IF_INFO | Simple LAN interface information |
| CLLAs | A wrapper struct for the LLA array type |
| CLNO_STATE | LNO state |
| CMBG_CHK_TIME_INFO | A structure to store the results of the mbg_chk_time_info routine |
| CMBG_CLK_RES_INFO | Clock resolution information |
| CMBG_CODE_NAME_TABLE_ENTRY | A table entry which can be used to map codes to names |
| CMBG_DAC_SPECS | DAC limit specs |
| Cmbg_database | |
| CMBG_DATABASE_CMD | |
| CMBG_DATABASE_GLB_INFO | |
| CMBG_DATABASE_INFO | |
| CMBG_DATABASE_INFO_IDX | |
| CMBG_DATABASE_SETTINGS | |
| CMBG_DATABASE_SETTINGS_IDX | |
| CMBG_DATE | A calendar date including full year number |
| CMBG_DATE_TIME | Date and time specification for switching operations |
| Cmbg_event | All monitoring event data |
| CMBG_EVENT_INFO | |
| CMBG_EVENT_INFO_IDX | Structure for monitoring event info |
| CMBG_EVENT_SETTINGS | |
| CMBG_EVENT_SETTINGS_IDX | Structure for monitoring event settings |
| CMBG_EVENT_STATUS | |
| CMBG_EVENT_STATUS_IDX | |
| CMBG_EVENT_VALUE | |
| CMBG_EVENT_VALUE_IDX | |
| CMBG_EVENT_VALUE_IRANGE | |
| CMBG_EVENT_VALUE_SELECTION | |
| CMBG_EVENT_VALUE_URANGE | |
| CMBG_EVT_LOG_ENTRY | An event log entry |
| CMBG_EXT_SYS_INFO | |
| CMBG_EXT_SYS_INFO_CPU_CODEC | |
| Cmbg_firmware | |
| Cmbg_firmware_ufu | |
| CMBG_FW_GLB_INFO | |
| CMBG_FW_INFO | |
| CMBG_FW_INFO_IDX | |
| CMBG_FW_UFU_FLASH_CMD | |
| CMBG_FW_UFU_INFO | |
| CMBG_FW_UFU_INFO_IDX | |
| CMBG_GNSS_MODE_INFO | |
| CMBG_GNSS_MODE_SETTINGS | GNSS mode settings |
| ►CMBG_GPIO_BITS_IN_SETTINGS | Configuration of a GPIO as BITS input module |
| ►Cquality | |
| Ce1 | |
| Ct1 | |
| CMBG_GPIO_BITS_IN_SUPP | Supported options of a BITS GPIO input |
| CMBG_GPIO_BITS_OUT_SETTINGS | Configuration of a GPIO as BITS output module |
| CMBG_GPIO_BITS_OUT_SUPP | Supported options of a BITS type GPIO output |
| CMBG_GPIO_CFG_LIMITS | General GPIO config info to be read from a device |
| CMBG_GPIO_DIGITAL_AUDIO_OUT_SETTINGS | Configuration of a GPIO digital audio output |
| CMBG_GPIO_DIGITAL_AUDIO_OUT_SUPP | Supported options for digital audio output |
| CMBG_GPIO_FIXED_FREQ_OUT_SETTINGS | Configuration of a GPIO fixed frequency output |
| CMBG_GPIO_FIXED_FREQ_OUT_SUPP | Supported options for a fixed frequency output |
| CMBG_GPIO_FREQ | A structure used to specify a variable frequency |
| CMBG_GPIO_FREQ_IN_SETTINGS | Configuration of a GPIO variable frequency input |
| CMBG_GPIO_FREQ_IN_SUPP | Supported options for a variable frequency GPIO input |
| CMBG_GPIO_FREQ_OUT_SETTINGS | Configuration of a GPIO variable frequency output |
| CMBG_GPIO_FREQ_OUT_SUPP | Supported options for a variable frequency GPIO output |
| CMBG_GPIO_INFO | A GPIO port's current settings and limits |
| CMBG_GPIO_INFO_IDX | A GPIO port's current settings and limits, plus port index |
| CMBG_GPIO_LIMITS | A generic structure used to specify a GPIO port's limits |
| CMBG_GPIO_SETTINGS | A generic structure used to hold a GPIO port's settings |
| CMBG_GPIO_SETTINGS_IDX | A GPIO port's current settings, plus port index |
| CMBG_GPIO_STATUS | Status information on a single GPIO port |
| CMBG_GPIO_STATUS_IDX | Status information on a specific GPIO port |
| CMBG_GPIO_STUDIO_CLOCK_OUT_SETTINGS | Configuration of a GPIO as studio clock output module |
| CMBG_GPIO_STUDIO_CLOCK_OUT_SUPP | Configuration of a GPIO as studio clock output module |
| CMBG_GPIO_VIDEO_OUT_SETTINGS | Configuration of a GPIO as video output module |
| CMBG_GPIO_VIDEO_OUT_SUPP | Supported options of a video type GPIO output |
| CMBG_GPIO_VIDEO_SYNC_OUT_SETTINGS | Configuration of a GPIO as sync output module |
| CMBG_GPIO_VIDEO_SYNC_OUT_SUPP | Supported options of a sync type GPIO output |
| CMBG_IMS_FDM_INFO | Specific FDM settings and limits |
| CMBG_IMS_FDM_LIMITS | A generic structure used to specify FDM limits |
| CMBG_IMS_FDM_OUTPUT_INFO | Specific output settings and limits |
| CMBG_IMS_FDM_OUTPUT_INFO_IDX | Specific output settings and limits, plus index |
| CMBG_IMS_FDM_OUTPUT_SETTINGS | Output settings of FDM device |
| CMBG_IMS_FDM_OUTPUT_SETTINGS_IDX | Output settings for FDM devices plus index |
| CMBG_IMS_FDM_OUTPUT_STATE | Output state of FDM device |
| CMBG_IMS_FDM_OUTPUT_STATE_IDX | Output state of FDM device plus index |
| CMBG_IMS_FDM_SETTINGS | FDM device settings |
| CMBG_IMS_FDM_STATE | State of FDM device |
| CMBG_IMS_SENSOR_STATE | Generic state of an IMS sensor |
| CMBG_IMS_SENSOR_STATE_IDX | Generic state of an IMS sensor, with sensor index |
| CMBG_IMS_STATE | Generic state of an IMS device |
| Cmbg_io_port | |
| CMBG_IO_PORT_ANT_INFO | |
| CMBG_IO_PORT_ANT_SETTINGS | |
| CMBG_IO_PORT_INFO | IO Port Info |
| CMBG_IO_PORT_INFO_IDX | IO Port Info Index |
| CMBG_IO_PORT_LIMITS | IO Port Limits |
| CMBG_IO_PORT_SETTINGS | IO Port Settings |
| CMBG_IO_PORT_SETTINGS_IDX | IO Port Settings Index |
| CMBG_IO_PORT_SETTINGS_U | IO Port Settings Union |
| CMBG_IO_PORT_STATUS | IO Port Type Status |
| CMBG_IO_PORT_STATUS_BUFFER | A structure used to store port status bits |
| CMBG_IO_PORT_STATUS_IDX | IO Port Type Status |
| CMBG_IO_PORT_TYPE_INFO | IO Port Type Info |
| CMBG_IO_PORT_TYPE_INFO_IDX | IO Port Type Info Index |
| CMBG_IO_PORT_TYPE_INFO_U | IO Port Type Info Union |
| CMBG_IOMEM_RSRC | Bus memory resource information for a device |
| CMBG_IOPORT_RSRC | I/O port resource information for a device |
| ►CMBG_IP_ADDR | An IPv4 or IPv6 network address |
| Cu_addr | |
| CMBG_IP_ADDR_IDX | An IPv4 or IPv6 network address, plus index |
| CMBG_IP_ADDR_PORT | An IPv4 or IPv6 network address plus UDP or TCP port number |
| CMBG_IRQ_RSRC | IRQ resource information for a device |
| Cmbg_klist_head | |
| CMBG_LED_INFO | Current settings and general capabilities of an LED |
| CMBG_LED_INFO_IDX | Current settings and general capabilities of an LED, plus index |
| CMBG_LED_LIMITS | General LED info to be read from a device |
| CMBG_LED_SETTINGS | Configuration settings for a single LED |
| CMBG_LED_SETTINGS_IDX | Configuration settings for a single LED, plus index |
| CMBG_LICENSE_BASE | Common license information |
| CMBG_LICENSE_LIMITS | General license information to be read from a device |
| CMBG_LICENSE_NTP | NTP specific license information |
| CMBG_LICENSE_NTP_IDX | |
| CMBG_LICENSE_PTPV1 | NTP specific license information |
| CMBG_LICENSE_PTPV1_IDX | |
| CMBG_LICENSE_PTPV2 | PTPV2 specific license information |
| CMBG_LICENSE_PTPV2_IDX | |
| CMBG_LICENSE_TIME_MONITOR | Sync Monitor specific license information |
| CMBG_LICENSE_TIME_MONITOR_IDX | |
| CMBG_LNE_LIMITS | General info to be read from an LNE device |
| CMBG_LNE_PORT_INFO | Current settings and general capabilities of an LNE port |
| CMBG_LNE_PORT_INFO_IDX | Current settings and general capabilities of an LNE port, plus index |
| CMBG_LNE_PORT_SETTINGS | Configuration settings for a single LNE port |
| CMBG_LNE_PORT_SETTINGS_IDX | Configuration settings for a single LNE port, plus index |
| CMBG_MAC_ADDR | The MAC address of a network interface |
| CMBG_MONITORING_LIMITS | |
| CMBG_MSG_BUFF | A buffer for a message header plus data part |
| ►CMBG_MSG_CTL_s | A generic message send and receive control structure |
| Cst | |
| ►CMBG_MSG_RCV_CTL | A structure used to control the reception of binary messages |
| Crcv_state | |
| CMBG_MSG_XMT_CTL | A structure used to control the transmission of binary messages |
| CMBG_NET_GLB_CFG_INFO | Global current network settings and supported features |
| CMBG_NET_GLB_CFG_SETTINGS | Global network configuration settings |
| CMBG_NET_INTF_ADDR_INFO | Network interface address specific settings, flags and supported features |
| CMBG_NET_INTF_ADDR_INFO_IDX | Query MBG_NET_INTF_ADDR_INFO by its index |
| CMBG_NET_INTF_ADDR_SETTINGS | Network interface address specific settings, flags and supported features |
| CMBG_NET_INTF_ADDR_SETTINGS_IDX | Query MBG_NET_INTF_ADDR_SETTINGS by its index |
| CMBG_NET_INTF_LINK_INFO | Link (physical interface) specific settings, flags and supported features |
| CMBG_NET_INTF_LINK_INFO_IDX | Query MBG_NET_INTF_LINK_INFO by its index |
| CMBG_NET_INTF_LINK_SETTINGS | Physical network interface link specific settings |
| CMBG_NET_INTF_LINK_SETTINGS_IDX | Link (physical interface) specific settings, plus index |
| CMBG_NET_INTF_ROUTE_INFO | Network interface address specific settings |
| CMBG_NET_INTF_ROUTE_INFO_IDX | Query MBG_NET_INTF_ROUTE_INFO by its index |
| CMBG_NET_INTF_ROUTE_SETTINGS | Network interface route specific settings |
| CMBG_NET_INTF_ROUTE_SETTINGS_IDX | Query MBG_NET_INTF_ROUTE_SETTINGS by its index |
| CMBG_NET_NAME | Network host or domain name |
| CMBG_NET_NAME_IDX | Network host or domain name, plus index |
| CMBG_NUM_EVT_LOG_ENTRIES | Number of event log entries that can be stored and yet have been saved |
| CMBG_OPT_INFO | A structure used to configure optional settings |
| CMBG_OPT_SETTINGS | A structure used to configure optional settings |
| CMBG_POLL_THREAD_INFO | A structure used to control a poll thread function |
| CMBG_PTP_STATISTICS_INFO | |
| CMBG_PTP_STATISTICS_SETTINGS | |
| CMBG_PTP_STATISTICS_STATUS | |
| CMBG_PTP_V1_CURRENT_DATASET | PTPv1 current dataset containing information about the synchronization status of the device |
| CMBG_PTP_V1_DEFAULT_DATASET | PTPv1 default dataset containing global information about the device |
| CMBG_PTP_V1_PARENT_DATASET | PTPv1 parent dataset containing information about the master (parent) of the device |
| CMBG_PTP_V1_PORT_DATASET | PTPv1 port dataset containing information about the appropriate port of the device |
| CMBG_PTP_V1_PORT_DATASET_IDX | Index structure for PTPv1 port dataset |
| CMBG_PTP_V1_TIME_PROPERTIES_DATASET | PTPv1 time drop dataset |
| CMBG_PTP_V2_CURRENT_DATASET | PTPv2 current dataset |
| CMBG_PTP_V2_DEFAULT_DATASET | PTPv2 default dataset |
| CMBG_PTP_V2_DEFAULT_DATASET_FLAGS | Flags structure for the PTPv2 default dataset |
| CMBG_PTP_V2_PARENT_DATASET | PTPv2 parent dataset |
| CMBG_PTP_V2_PARENT_DATASET_FLAGS | Flags structure for the PTPv2 parent dataset |
| CMBG_PTP_V2_PORT_DATASET | PTPv2 port dataset |
| CMBG_PTP_V2_PORT_DATASET_IDX | Index structure for PTPv2 port dataset |
| CMBG_PTP_V2_TIME_PROPERTIES_DATASET | PTPv2 time properties dataset |
| CMBG_PTP_V2_TIME_PROPERTIES_DATASET_FLAGS | Flags structure for the PTPv2 time properties dataset |
| CMBG_PWR_CTL | Device power control |
| CMBG_RAW_IRIG_DATA | A buffer used to read raw IRIG data bits from an IRIG receiver |
| Cmbg_service | |
| CMBG_SERVICE_INFO | |
| CMBG_SERVICE_INFO_IDX | |
| CMBG_SERVICE_MGMT_INFO | |
| CMBG_SERVICE_SETTINGS | |
| CMBG_SERVICE_SETTINGS_IDX | |
| CMBG_SERVICE_STATUS | |
| CMBG_SERVICE_STATUS_IDX | |
| CMBG_SNMP_GLB_INFO | |
| CMBG_SNMP_GLB_SETTINGS | |
| CMBG_SNMP_V12_INFO | |
| CMBG_SNMP_V12_INFO_IDX | |
| CMBG_SNMP_V12_SETTINGS | |
| CMBG_SNMP_V12_SETTINGS_IDX | |
| CMBG_SNMP_V12_TRAP_INFO | |
| CMBG_SNMP_V12_TRAP_INFO_IDX | |
| CMBG_SNMP_V12_TRAP_SETTINGS | |
| CMBG_SNMP_V12_TRAP_SETTINGS_IDX | |
| CMBG_SNMP_V3_INFO | |
| CMBG_SNMP_V3_INFO_IDX | |
| CMBG_SNMP_V3_SETTINGS | |
| CMBG_SNMP_V3_SETTINGS_IDX | |
| CMBG_SNMP_V3_TRAP_INFO | |
| CMBG_SNMP_V3_TRAP_INFO_IDX | |
| CMBG_SNMP_V3_TRAP_SETTINGS | |
| CMBG_SNMP_V3_TRAP_SETTINGS_IDX | |
| CMBG_STD_MSG | The format of a standard binary message |
| CMBG_SYS_TIME_CYCLES | System time plus associated cycles counter values |
| CMBG_SYSLOG_GLB_INFO | |
| CMBG_SYSLOG_GLB_SETTINGS | |
| CMBG_SYSLOG_INFO | |
| CMBG_SYSLOG_INFO_IDX | |
| Cmbg_syslog_server | All monitoring syslog data |
| CMBG_SYSLOG_SETTINGS | |
| CMBG_SYSLOG_SETTINGS_IDX | |
| CMBG_TAINTED_CFG | |
| CMBG_THREAD_INFO | A generic thread info structure |
| CMBG_TIME | The time of day including hundredths of seconds |
| CMBG_TIME_INFO_HRT | High resolution device time, system time, and associated cycles counts |
| CMBG_TIME_INFO_TSTAMP | High resolution device time stamp, system time, and associated cycles counts |
| CMBG_TIME_SCALE_INFO | Time scale configuration settings plus capabilities |
| CMBG_TIME_SCALE_SETTINGS | Time scale configuration settings |
| CMBG_TLV | TLV structure containing information on current TLV transaction and its current data |
| CMBG_TLV_ANNOUNCE | A structure initiating a TLV transfer |
| CMBG_TLV_DATA | General TLV data structure |
| CMBG_TLV_FEAT_BUFFER | A structure used to store a bit mask of supported TLV context types |
| CMBG_TLV_HDR | TLV header structure containing information on current TLV transaction |
| CMBG_TLV_INFO | A structure used to query current TLV capabilities |
| CMBG_TLV_RCV_STATE | Structure containing state information while reading TLV data |
| CMBG_UCAP_NET_GLB_INFO | Global settings, features and flags for user captures via network |
| CMBG_UCAP_NET_GLB_SETTINGS | Global settings for user captures via network |
| CMBG_UCAP_NET_RECV_INFO | Settings, features and flags for receivers of user captures via network |
| CMBG_UCAP_NET_RECV_INFO_IDX | Settings, features and flags for receivers of user captures via network |
| CMBG_UCAP_NET_RECV_SETTINGS | Settings for receivers of user captures via network |
| CMBG_UCAP_NET_RECV_SETTINGS_IDX | Settings for receivers of user captures via network |
| Cmbg_user | |
| CMBG_USER_CHANNEL_BUF | A structure used to store user channels |
| CMBG_USER_INFO | |
| CMBG_USER_INFO_IDX | |
| CMBG_USER_MNGMNT_INFO | |
| CMBG_USER_MNGMNT_SETTINGS | |
| CMBG_USER_PERM_BUF | A structure used to store user permissions |
| CMBG_USER_SETTINGS | |
| CMBG_USER_SETTINGS_IDX | |
| CMBG_USER_STATUS | |
| CMBG_USER_STATUS_IDX | |
| CMBG_XDEV_FEATURES | A structure combining all device feature information |
| CMBG_XFEATURE_BUFFER | A structure used to store extended device features |
| CMBG_XHRT_INFO | A status structure provided by the time polling thread function |
| CMBG_XHRT_VARS | A structure holding a time stamp / cycles count pair |
| CMBGSERIO_DEV | |
| CMSG_DATA | A union of all data types used with the binary protocol |
| CMSG_HDR | The header of a binary message |
| CMULTI_REF_INFO | A structure used to query MULTI_REF configuration parameters |
| CMULTI_REF_SETTINGS | A structure used to configure the priority of the supported ref sources |
| CNANO_TIME | A timestamp with nanosecond resolution |
| CNANO_TIME_64 | A timestamp with nanosecond resolution, but 64 bit size |
| CNAV_ENGINE_SETTINGS | |
| CNAV_TIME_MODE_SETTINGS | |
| CNTP_CLIENT_CFG_PEER_SETTINGS | All NTP configuration parameters |
| CNTP_CLNT_MODE_INFO | Client settings info of an NTP device |
| CNTP_CLNT_MODE_SETTINGS | Client settings of an NTP device |
| CNTP_DISCARD_LIMITS | General NTP "discard" rate limiting limits to be read from a device |
| CNTP_DISCARD_SETTINGS | NTP "discard" rate limiting settings as described at ntp.org's manual |
| CNTP_GLB_INFO | Global configuration info of an NTP device (client/server) |
| CNTP_GLB_SETTINGS | Global configuration settings of an NTP device (client/server) |
| CNTP_MISC_DRIFTFILE_SETTINGS | NTP driftfile settings to be read from / written to a device |
| CNTP_MISC_LEAPFILE_SETTINGS | NTP leapfile settings to be read from / written to a device |
| CNTP_MISC_LIMITS | General NTP misc limits to be read from a device |
| CNTP_MISC_ORPHAN_MODE_INFO | NTP orphan mode info |
| CNTP_MISC_ORPHAN_MODE_SETTINGS | NTP orphan mode settings to be read from / written to a device |
| CNTP_PEER_LIMITS | General NTP peer settings limits to be read from a device |
| CNTP_PEER_SETTINGS | Peer settings for NTP devices to configure an upload NTP server |
| CNTP_PEER_SETTINGS_IDX | Peer settings for NTP devices |
| CNTP_PEER_STATE | Structure that represents the status of an NTP peer |
| CNTP_PEER_STATE_IDX | Structure that contains an index value and the NTP peer state |
| CNTP_REFCLK_CFG_INFO | NTP refclock configuration and supported refclock types |
| CNTP_REFCLK_CFG_INFO_IDX | NTP refclock info, with index |
| CNTP_REFCLK_CFG_SETTINGS | NTP refclock specific settings |
| CNTP_REFCLK_CFG_SETTINGS_IDX | NTP refclock settings index |
| CNTP_RESTR | NTP restriction |
| CNTP_RESTR_IDX | NTP restriction, plus index |
| CNTP_RESTR_LIMITS | General NTP restriction limits to be read from a device |
| CNTP_SHORT_TSTAMP | Structure that represents a timestamp in NTP Short Format |
| CNTP_SRV_MODE_INFO | Server settings info of an NTP device |
| CNTP_SRV_MODE_SETTINGS | Server settings of an NTP device |
| CNTP_STATS_GLB_INFO | NTP statistics settings |
| CNTP_STATS_GLB_SETTINGS | Global NTP statistics settings to be read from / written to a device |
| CNTP_SYMM_KEY_INFO | NTP symmkey info |
| CNTP_SYMM_KEY_INFO_IDX | NTP symm key info, with index |
| CNTP_SYMM_KEY_LIMITS | General NTP symmetric key limits to be read from a device |
| CNTP_SYMM_KEY_SETTINGS | NTP symmetric key specific settings |
| CNTP_SYMM_KEY_SETTINGS_IDX | NTP symmetric key settings, with index |
| CNTP_SYS_STATE | Structure that represents the current system status of an NTP device |
| CNTP_TRUSTED_KEY_INFO | NTP trusted key info |
| CNTP_TRUSTED_KEY_INFO_IDX | NTP trusted key info, with index |
| CNTP_TRUSTED_KEY_SETTINGS | NTP trusted key settings |
| CNTP_TRUSTED_KEY_SETTINGS_IDX | NTP trusted key settings, with index |
| CNTP_TSTAMP | Structure that represents a timestamp in NTP Timestamp Format |
| COPT_HANDLER_SPEC_S | |
| CPCI_ASIC | Register layout of a PCI ASIC |
| CPCI_ASIC_ADDON_DATA | The addon-data part of a PCI ASIC |
| CPCI_ASIC_CFG | Set of PCI ASIC registers which are writeable once after power-up |
| CPCI_ASIC_REG | A PCI ASIC register as 32, 16, or 8 bit accessible union |
| CPCI_ASIC_VERSION_INFO | A structure holding version information for a specific device |
| CPCI_CFG_SPACE | |
| CPCI_CLASS | |
| CPCI_IRQ_ROUTE_ENTRY | |
| CPCPS_DDEV_s | |
| CPCPS_DEV | Device info structure |
| CPCPS_DEV_CFG | Device information |
| CPCPS_DEV_TYPE | Device type specification |
| CPCPS_DL_ONOFF | Daylight changeover specification |
| CPCPS_DRVR_INFO | Device driver information |
| CPCPS_HR_TIME | High resolution time including status and local time offset |
| CPCPS_HR_TIME_CYCLES | High resolution time plus associated system cycles count |
| CPCPS_IO_BUFFER | An I/O buffer for bus level devices |
| CPCPS_IRIG_TIME | Raw IRIG time |
| CPCPS_MAPPED_MEM | A structure used to retrieve an address to be mapped into user space |
| ►CPCPS_MM_LAYOUT | Memory layout of Meinberg PCI interface register |
| Cmbgpex | |
| Cpex8311 | |
| CPCPS_RSRC_INFO | Resource info summary for a device |
| CPCPS_SER_PACK | A helper structure used with configuration of old DCF77 clocks |
| CPCPS_SHORT_PORT_RSRC | An I/O port resource used by a device |
| CPCPS_STATUS_STR | |
| CPCPS_STATUS_STRS | |
| CPCPS_STIME | Date time and status used with the PCPS_SET_TIME command |
| CPCPS_TIME | Local calendar date and time, plus sync status |
| CPCPS_TIME_CYCLES | Time read from a device plus associated system cycles count |
| CPCPS_TIME_EXT | An extended time and status structure |
| CPCPS_TIME_STAMP | A high resolution time stamp |
| CPCPS_TIME_STAMP_CYCLES | High resolution time stamp plus associated system cycles count |
| CPCPS_TIME_STATUS_X_MASKS | |
| CPCPS_TIME_UNION | |
| CPCPS_TZDL | Specification of a local time zone |
| CPCPS_UCAP_ENTRIES | Status of the time capture FIFO buffer |
| CPORT_INFO | Current settings and general capabilities of a serial port |
| CPORT_INFO_IDX | Current settings and general capabilities of a specific serial port |
| CPORT_PARM | A The structure used to store the configuration of two serial ports |
| CPORT_SETTINGS | Configuration settings of a serial port |
| CPORT_SETTINGS_IDX | Configuration settings of a specific serial port |
| CPOS | A geographic position represented in different formats |
| CPOUT_DATA | A Generic data field for programmable output settings |
| CPOUT_INFO | Current settings and general capabilities of a programmable pulse output |
| CPOUT_INFO_IDX | Current settings and general capabilities of a specific programmable pulse output |
| CPOUT_SETTINGS | Configuration settings for a single programmable pulse output |
| CPOUT_SETTINGS_IDX | Configuration settings for a specific programmable pulse output |
| CPOUT_TIME | A structure to define on/off cycle times |
| CPTP_CFG_INFO | A structure to used to query the current configuration and capabilities of a PTP port |
| CPTP_CFG_SETTINGS | A structure used to configure a PTP port |
| CPTP_CLOCK_ID | A PTP clock identity |
| CPTP_CLOCK_QUALITY | PTP clock quality |
| CPTP_PORT_IDENTITY | A PTP port identity |
| CPTP_POWER_PROFILE_CFG | |
| CPTP_SMPTE_PROFILE_CFG | Additional parameters for SMPTE ST 2059-2 profile |
| CPTP_STATE | A structure to used to read the status of the PTP protocol stack |
| CPTP_TABLE | An entry for a table of parameters which can not be accessed by an enumerated index |
| CPTP_TELECOMG8275_PROFILE_CFG | Additional parameters for Telecom8275.1 profile |
| CPTP_TIME_INTERVAL | PTP time interval |
| CPTP_UC_MASTER_CFG_LIMITS | Limits to be considered when specifying PTP unicast masters |
| CPTP_UC_MASTER_INFO | Current settings and general capabilities of a unicast master |
| CPTP_UC_MASTER_INFO_IDX | Current settings and general capabilities of a specific unicast master |
| CPTP_UC_MASTER_SETTINGS | Configuration settings specifiying how to query a PTP unicast master |
| CPTP_UC_MASTER_SETTINGS_IDX | Configuration settings for a specific PTP unicast master |
| CPTP_V1_UUID | PTPv1 UUID structure used in MBG_PTP_V1_DEFAULT_DATASET |
| CRECEIVER_INFO | A structure used to identify a device type and supported features |
| CRECEIVER_PORT_CFG | All configuration parameters for all serial ports |
| Croute_info | |
| CSCU_STAT_INFO | |
| CSCU_STAT_SETTINGS | |
| CshmTime | Structure of NTP's shared memory segment |
| CSHS_INFO | Current SHS settings and general SHS capabilities |
| CSHS_SETTINGS | Current configuration of an SHS controller |
| CSHS_STATUS | Current SHS status |
| CSTAT_INFO | Satellite receiver status information |
| CSTD_MSG_DATA_BUFF | A union of all data types used with the binary protocol, or array of bytes |
| CSTR_TYPE_INFO | Information on a supported string format |
| CSTR_TYPE_INFO_IDX | Information on a specific supported string format |
| CSV_ALM | An SV number plus the SV's almanac data |
| CSV_EPH | An SV number plus the SV's ephemeris data |
| CSW_REV | Software revision information |
| CSYNTH | Synthesizer configuration parameters |
| CSYNTH_STATE | A structure used to report the synthesizer state |
| CT_GPS | A structure used to hold time in GPS format |
| CTIMEOUT | |
| CTM_GPS | Local date and time computed from GPS time |
| CTTM | A structure used to transmit information on date and time |
| CTZCODE_UNION | A union holding different types of a TZ code |
| CTZDL | Time zone / daylight saving parameters |
| CUCAP_ENTRY | |
| CUL | |
| CUSER_POS | A structure used internally to compute a geographic position |
| CUTC | GPS UTC correction parameters |
| CVST_HEADER | |
| CXBP_ADDR | An XBP address specifier |
| CXBP_LIMITS | A structure used to report XBP features and limits |
| CXBP_MSG_DATA | The data portion of an XBP message |
| CXBP_MSG_HDR | A message header for the eXtended Binary Protocol (XBP) |
| CXBP_NODE_INFO | Information on a specific XBP node |
| CXBP_NODE_INFO_IDX | Information on an XBP node with specific index |
| CXBP_NODE_LIMITS | Information on available XBP nodes |
| CXMR_EXT_SRC_INFO | |
| CXMR_EXT_SRC_INFO_IDX | |
| CXMR_HOLDOVER_STATUS | XMR holdover status |
| CXMR_METRICS | |
| CXMR_METRICS_IDX | XMR timing metrics for a particular source, with index |
| CXMR_QL_INFO | |
| CXMR_QL_INFO_IDX | |
| CXMR_QL_SETTINGS | Supported limits for qualtity metrics |
| CXMR_QL_SETTINGS_IDX | |
| CXMR_STATS | XMR statistics for a particular source |
| CXMR_STATS_IDX | XMR statistics for a particular source, with index |
| CXMULTI_REF_ID | Identifier for a reference source |
| CXMULTI_REF_INFO | Reference source capabilities and current configuration |
| CXMULTI_REF_INFO_IDX | Reference source capabilities and current configuration for a specific priority level |
| CXMULTI_REF_INSTANCES | General info on supported XMR sources and instances |
| CXMULTI_REF_SETTINGS | Reference source configuration settings |
| CXMULTI_REF_SETTINGS_IDX | Reference source configuration for a specific priority level |
| CXMULTI_REF_STATUS | Status information on a single ref time source |
| CXMULTI_REF_STATUS_IDX | Status information on a ref time source at a specific priority level |
| CXYZs | A wrapper struct for the XYZ array type |